Waliv, Vasai East, Maharashtra +91 8669118834
Gurukrupa Enterprises
Unit Converters

Bar to PSI (General Unit Converter)

General-purpose bar to PSI conversion for any engineering pressure value, not just compressed air.

Calculate

Result
—
Copied

About this calculator

A general-purpose bar-to-PSI converter for any engineering context — hydraulic systems, tyre pressure, boiler ratings, pump discharge — not limited to compressed air. Uses the exact factor of 1 bar = 14.5038 PSI.

Formula

PSI = bar × 14.5038
  • barPressure — bar
  • PSIPressure — pounds per square inch

Worked Example

Given: A hydraulic system is rated at 1 bar minimum.

Result: 1 × 14.5038 = 14.5 PSI.

How to Use

  1. Enter the pressure value in bar.
  2. Click Calculate to see the equivalent in PSI.

Important Assumptions

  • Unit conversion only; does not distinguish gauge from absolute pressure.

Common Mistakes

  • Applying this to a value already in kPa or MPa without converting to bar first.

Frequently Asked Questions

Is this different from the compressor Bar to PSI converter?

The formula and result are identical — this version is listed under general unit converters for engineering uses beyond compressed air, such as hydraulics or tyre pressure.

These calculators are provided for informational and estimation purposes. Results depend on the assumptions and input values used. Always verify critical engineering calculations against applicable standards, manufacturer specifications, site measurements, and qualified professional advice.