Waliv, Vasai East, Maharashtra +91 8669118834
Gurukrupa Enterprises
Unit Converters

PSI to Bar (General Unit Converter)

General-purpose PSI to bar conversion for any engineering pressure value, not just compressed air.

Calculate

Result
—
Copied

About this calculator

A general-purpose PSI-to-bar converter for hydraulic systems, tyre pressures, boiler ratings and other engineering uses beyond compressed air, using the exact factor of 1 bar = 14.5038 PSI.

Formula

bar = PSI ÷ 14.5038
  • PSIPressure — pounds per square inch
  • barPressure — bar

Worked Example

Given: A vehicle tyre is specified at 30 PSI.

Result: 30 ÷ 14.5038 = 2.07 bar.

How to Use

  1. Enter the pressure value in PSI.
  2. Click Calculate to see the equivalent in bar.

Important Assumptions

  • Unit conversion only.

Common Mistakes

  • Assuming tyre-gauge PSI is the same reference (gauge) as a process pressure PSI figure without checking — always confirm gauge versus absolute for the specific application.

Frequently Asked Questions

Is tyre pressure gauge or absolute?

Tyre pressure specifications are almost always gauge pressure (relative to atmosphere), same as most compressor and hydraulic pressure gauges.

These calculators are provided for informational and estimation purposes. Results depend on the assumptions and input values used. Always verify critical engineering calculations against applicable standards, manufacturer specifications, site measurements, and qualified professional advice.